CKMQF - PUROLITE C-100 H ION EXCHANGE RESIN
- MSDS: CKMQF
- Manufacturer: THE PUROLITE CO DIV OF BRO TECH CORP
- Product Name: PUROLITE C-100 H ION EXCHANGE RESIN
- National Stock Number: 6810-01-388-8971
Product Identification
Product ID:PUROLITE C-100 H ION EXCHANGE RESIN
MSDS Date:01/01/2000
FSC:6810
NIIN:01-388-8971
Status Code:A
Kit Part:Y
MSDS Number: CKMQF
Responsible Party
BALA-CYNWYD, PA 19004-1713
US
Emergency Phone: 610-668-9090
Info Phone: 610-668-9090
Cage: 67168
Contractor
Telephone: 610-668-9090
Cage: 67168
Ingredients
NONE
Hazards
Medical Cond Aggravated by Exposure:EYE CONTACT: LIKE OTHER FOREIGN
BODIES, PARTICLES MAY CAUSE MECHANICAL IRRITATION OF THE EYE.
First Aid
First Aid:EYE: FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15 MINS.
CONSULT PHYSICIAN IF IRRITATION PERSISTS.
Fire Fighting
Autoignition Temp:=426.7C, 800.F
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED, PRESSURE DEMAND,
SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Handling
Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49 DEG C (120 DEG F) AND ABOVE 0 DEG C
(32 DEG F).
Exposure Controls
Respiratory Protection:NONE.
Ventilation:LOCAL EXHAUST: NORMAL ROOM VENTILATION.
Protective Gloves:NONE.
Eye Protection:SAFETY GLASSES (ANSI Z87.1).
Other Protective Equipment:NONE
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
ITEM IS A TWO PART KIT. KIT CONTAINS TWO 5 GALLON PAILS OF CATION AND
TWO 5 GALLON PAILS OF ANION; FORM: CERAMIC BEAD.
Chemical Properties
HCC:N1
Spec Gravity:APPROX 1.26 (H20=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER TO MAHOGANY COLORED SPERICAL BEADS WITHOUT
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH CONCENTRATED NITRIC ACID, OR STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES OVER 220 DEG C (424 DEG
F).
Hazardous Decomposition Products:SO2, SO3, CO, CO2, STYRENE MONOMER,
DIVINYLBENZENE.
Disposal
Waste Disposal Methods:MUST BE DISPOSED OF IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.